Tait Yachts
Waterfront Marina, Bay St.
Sag Harbor, NY, US, 11963
Tel:(631) 725-4222
A-yachts A-33 - main image

2024 A-Yachts A 33

location icon Peschiera del Garda, Verona
Year 2024
Length 33 ft

The ‘performante’ model is equipped with a carbon mast and bowsprit, as well as inconspicuous but easily operated trim devices. It is the ideal yacht to take treasure hunting at the weekend regatta. The a33 peformante features a more heavily geared downhaul and includes a barberhouler for the jib clew point, as well as a cunningham for the mainsail, and options for a Code 0 or masthead genoa. With a cockpit more spacious and comfortable than any of its class, the crew can end their day on the water in maximum relaxation.

A-Yachts presents the newly revised a33 performante at BOOT 2023. The race-oriented sailor steers this elegant daysailer with a tiller instead of the two steering wheels of the a33 pure and a33 solar version. The carbon hull and rig with rod rigging as well as hydraulic mainsheet and downhaul remain standard to continue perfect single-handed sailing despite large sail areas. Guests can still enjoy the most spacious cockpit in this class, without any restriction from an aft-stay or backstays. . The engine lineup is expanded from previously diesel to a hybrid and an electric motor. The list of other options has been extended to include an autopilot below deck, carbon steering wheels, double bed, a Code 0, a masthead genoa, a separate wet cell and much more, and is almost unlimited. 

Specifications

Year Built 2024
Category Sail
Length Overall 33 ft
Beam 9 ft
Max Draft 6'4 ft
Construction Composite
Hull ID AYS12345678924
Keel Fin Keel
Drive Type Sail
Engines 1
Total Engine Power 12 hp
Ballast 2535 lb
Displacement 5,732 lb

Engine 1 Specifications

Make: Volvo
Model: D1-13MS10A
Fuel: Diesel
Engine Power: 12hp
Type: Inboard
Drive Type: SailDrive
Year: 2024
Construction
  • Hull: Carbon/GFK sandwich construction with epoxy - vacuum infusion.
  • Deck: Carbon/GFK sandwich construction with epoxy - vacuum infusion.
  • Reinforcements: Carbon with epoxy - vacuum Infusion.
  • Keel shaft: high-strength steel - Weldox 700
  • Keel bomb: Lead
Options

Options Diesel 19HP Volvo Penta

Electric Engine 7kW

Flexiteek

Full closed Toilettroom with sink (electric or chemical toilet)

Aluminium Mast Winch

upgrade Battery

upgrade Electronics Autopilot 

Finish
  • Cabin roof, cockpit and freeboard painted
  • Underwater and attachments sanded and ready for painting
  • Interior painted light grey Deck –
  • Teakdeck 8mm
Mast and Rigging
  • Carbon mast
  • Two sets swept aft spreaders 25 deg.
  • Carbon boom
  • : Internal Mainsheet -
  • Outhaul Lock offs for reef lines
  • (2) provision for lazy jack system
  • Standing rigging; discontinuous rod with BSI -
  • 1 Dyneema® mainsailhalyard - 1 Dyneema® jib halyard and 1 Dyneema® gennaker halyard
Mechanical
  • Diesel engine: Inboard engine -Volvo D1-13/MS10A - 12,2 Hp @3200 revs
  • Propeller stock
  • Fuel tank 40 lt. (Metallic/plastic) + fuel ca & pipe Aqua Lift, pipes, filters Insulations Commanders/lever etc.
  • Engine control panel in way of steering position with single lever throttle
  • Propeller: Radice Two blades
  • Bilge pump: manual
Hydraulics
  • Mainsheet: hydraulic ram by Cariboni
  • Vang: hydraulic ram by Cariboni
  • Central Unit and Electrical panel by Cariboni
  • Buttons on the pedestals
Electric
  • 12-volt DC Circuit Breakers of appropriate amperage
  • One alternator 115 amps.
  • Engine Batteries: 1 x 100 ah Service Batteries: 2x 145 ah
Deck Fittings
  • Complete Harken gear
  • 2 winches Harken B40.2 STA, winch handles,
  • mainsheet fixed point,
  • jib self-tacking track
  • general deck gear Harken and Spinlock
  • Manual jib furling ID unit#1 Harken
  • Custom metal work (pipes /fairleads)
  • Folding cleats (4 off) by Sea Smart
  • Foredeck hatch - flush deck Sea Smart
  • Cockpit hatch - flush deck Sea smart
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information
Contact Bruce Tait
c: +1 631 871 2481o:+1 631 725 4222
E: bruce@taityachts.net